>Voltage 220V AC +15% Standard (115V AC +15% 60 Hz Optional)
>Frequency 50 Hz Single Phase
>Operating temperature -5° to 65° Centigrade
>Current consumption 200 VA typical
>Environmental Waterproof housing. Conformal coating on all printed circuit boards.
>Humidity control Integral heater lamp with temperature control and air circulation.
>Cabinet dimensions 1005mm (high) x 400mm (wide) x 450 (deep)
>Material 1.6mm mild steel. 304 Stainless steel optional. 2.0mm steel optional
>Finish Epoxy powder coated
>Standard Colours Yellow, Red or White. Other RAL colours available on application.
Drive Mechanism
>Ticket Issue Head Aluminium
>Position Sensors Optic
>Cutter Solenoid solid state relay control
>Fault Diagnosis Ticket supply exhausted, and Ticket jam
>Character Print Method 7 Wire dot matrix
>Inking Method Auto advance ribbon cassette
>Ribbon Life 75000 tickets typically
>Ribbon Type Epson LX 80 or GX80.
Ticket Information.
>Date Formatted dd-mm-yy
>Time Formatted hh-mm (24 hour format) in expanded print
>Location Code 8 Characters Alpha numeric
>Ticket Serial Number 7 Digit number automatically progressing.
Programmable Parameters.
>Input Method 5 Keypad with switch inhibit
>Output Display 16 Character, 1 line alphanumeric LCD display.
>Time & Date Hours -24 hour format with battery back up.
>Location Description 8 Character retained in non volatile memory
>Cut Position Adjust 10 position adjust from the perforation.
>Ticket Serial Number 7 Digit programmable serial number.
Interface Signals.
>Non-Memory Input Vehicle barrier opening interface.
>Ticket Issue Interface Inhibits the issue of further tickets under certain circumstances.
>Arming Input Arms the unit to dispense a ticket on the presence of a vehicle
Audible Output.
>Non-Memory Input. Instructs the vehicle barrier to open.
>Ticket Issue Interlock Prevents the issue of tickets under certain circumstances.
>Arming Input Allows the unit to be receptive to a vehicle for push-button operations.